Table of Contents
Advertisement
Open the cover.
Fit the screws into the holes .
Tip: Pre-drill the holes.
Risk of damage to the securing
bracket and cover.
The cover on the securing bracket
can easily become detached.
Always close the cover as soon as
you have finished working on the
bracket.
Close the cover and close the door.
Z: depth adjustment
Check the distance between the
cabinet door and the housing unit. A
distance of approximately 1/16" (2 mm)
is required.
Undo screws and .
Tighten all the screws again.
Installation
111
Advertisement
Table of Contents
