Table of Contents
Advertisement
Risk of damage!
Do not overtighten the union nut, as
this can cause damage.
Connect the union nut to the
solenoid valve , and tighten it.
If you want to divert the water line by
90°, screw on the elbow .
In case of a water line with a 1/4"
thread:
Connect the water line (e.g.,
copper) to the adapter or elbow
using the clamping ring and nut .
In case of a water line with a 7/16"-24
UNS thread:
Connect the water line directly to
the adapter or elbow (a
clamping ring and nut are not
required).
Secure the water line to the casing
using the retaining clip .
Slowly open the faucet in the water
supply line and check the whole
water system for leaks.
The appliance can now be connected
to the power supply (see "Electrical
connection").
When pushing the appliance into the
niche, do not bend or damage the
water line.
Push the appliance into its final
position.
Installation
115
Advertisement
Table of Contents
