Table of Contents
Advertisement
Switching on and off
When the door is opened, the interior
lighting comes on and the LED lighting
on the shelves becomes brighter until it
reaches its maximum brightness.
When the appliance is switched on for
the first time, the sensor button for the
Freezer Zone and the alarm symbol
flash until the set freezer temperature is
reached.
As soon as the set freezer temperature
is reached, the sensor button for the
Freezer Zone lights up (continuous light)
and the alarm symbol goes out.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it. Do not
place food in the Freezer Zone until it
has reached the required coldness (at
least 0°F/-18°C).
22
Individual settings can be set for each
zone.
Touch the sensor button for the zone
in which you want to adjust the
settings.
The selected sensor button will light up
yellow.
The Automatic SuperCool function can
be selected or the temperature can be
adjusted for the Fridge Zone.
The SuperCool function can be
selected or the temperature can be
adjusted for the Freezer Zone.
Please refer to the relevant sections for
more information.
If another zone is then selected, the
settings for the previously selected
zone will remain unchanged.
Advertisement
Table of Contents
