Table of Contents
Advertisement
Touch the settings sensor to exit
settings mode.
If you do not do this, the appliance
electronics will exit settings mode
automatically after approximately
1 minute.
The temperature will now be displayed
in Fahrenheit.
Selecting additional settings
Audible signals
The appliance has audible signals such
as the button tone and the door and
temperature alarms.
You can turn the button tone and the
door alarm on and off, but you cannot
turn off the temperature alarm.
There are 4 settings to choose from.
Option 3 is set at the factory; this
means that the button tone and the
door alarm are switched on.
Switching acoustic signals on/off
Touch the settings sensor.
All symbols available for selection will
appear on the display and the
symbol will flash.
Touch the sensors for setting the
temperature ( or ) repeatedly until
the symbol flashes on the display.
Touch the OK sensor to confirm the
selection.
The most recently selected setting
flashes and the symbol lights up on
the display.
37
Advertisement
Table of Contents
