Miele KFNS 37692 iDE-1 Operating And Installation Instructions page 7

Hide thumbs Also See for KFNS 37692 iDE-1:
Table of Contents

Advertisement

Technical safety
The coolant circuit has been checked for leaks. The refrigeration
appliance complies with statutory and regulatory requirements..
This refrigeration appliance contains the coolant Isobutane
(R600a), a natural gas which is environmentally friendly. Although it is
combustible, it does not damage the ozone layer and does not
contribute to the greenhouse effect.
The use of this coolant has, however, led to a slight increase in the
noise level of the appliance. In addition to the noise of the
compressor, you might be able to hear the coolant flowing around
the cooling circuit. Unfortunately, this cannot be avoided, but it does
not affect the performance of the refrigeration appliance.
When transporting and installing the refrigeration appliance, ensure
that no parts of the cooling circuit are damaged. Splashes of coolant
can damage the eyes.
In the event of damage:
– Avoid open flames or anything which creates a spark.
– Disconnect the refrigeration appliance from the power supply.
– Ventilate the room where the refrigeration appliance is located for
several minutes.
– Contact Miele Customer Service.
The more coolant there is in a refrigeration appliance, the larger
the room it should be installed in. In the event of a leakage, if the
appliance is in a small room, there is the danger of a combustible
gas/air mixture building up. For every 11 g of coolant, at least 1 m
room space is required. The amount of coolant in the refrigeration
appliance is stated on the data plate inside the appliance.
IMPORTANT SAFETY INSTRUCTIONS
3
of
7

Advertisement

Table of Contents
loading

Table of Contents