Table of Contents
Advertisement
Installation
Before installing the appliance
Before installation, remove the bag of
installation and other accessories
from the appliance and remove the
profile strip from the outer appliance
door.
Do not remove the following from
the back of the appliance
– the spacers (depending on the
model). They ensure the distance
required between the back of the
appliance and the wall.
– the bags located in the metal grille
(heat exchanger, depending on
model).
These are required for the functioning
of the appliance. Their contents are
not toxic or hazardous.
Remove the cable clips from the back
of the appliance.
92
Remove red transport safety
device (depending on model) and
use the stopper supplied to cover the
hole .
Advertisement
Table of Contents
