Problem
The compressor runs
continuously.
An LED indicator light is
flashing at the back of
the refrigerator at the
bottom near the com-
pressor (depending on
model).
The electronic for the
compressor is equipped
with an operation and
fault diagnosis LED in-
dicator light.
The door seal is dam-
aged and needs to be
replaced.
Ice or condensation has
built up inside the appli-
ance.
Frequently Asked Questions
Possible cause and solution
Not a fault. To save energy, the compressor runs at
a lower speed when less cooling is required. This
increases the compressor run time.
The indicator light flashes several times every
5 seconds.
A fault has occurred.
Contact Customer Service.
The indicator light flashes regularly every
15 seconds.
This is not a fault. This flashing is normal.
No tools are required to change the door seal.
Contact Miele Service.
The door seal has come out of its groove.
Check that the door seal is correctly positioned in
the groove.
The door seal is damaged.
Check whether the door seal is damaged.
73