Caution For Installation; Dimension Data; Installation Clearance Data - GREE ELECTRIC GUHD09NK3CO Service Manual

U-Match Series DC
Inverter Service Manual

2.3 Caution for Installation

enough space shall be maintained around the machine for repair;
The installing position shall be in good ventilation, so that the machine can breathe and exhaust enough air.
Ensure that there is no obstruction at the inlet and outlet of the machine. If any, please remove the obstructions blocking
the air inlet and outlet.
ensure that the machine is kept vertical and horizontal.
The outdoor unit must be lifted by using the designated lift hole. During lifting, take care to protect the air
conditioner and avoid knocking the metal parts, thus to prevent rusting in the future.
To meet the noise and vibration requirements, the outdoor unit shall be installed by using rubber damping pad or
spring damper.
To install the drainage pipe, please insert the drainage joint to the drainage hole on the outdoor chassis and
connect a drainage pipe on the drainage joint. (The installing height of outdoor unit shall be at least 5cm if drainage joint
is to be used).
To insert the pipe through the wall, the wall-cross tube must be installed.
The installing dimension shall comply with the installation requirements in these instructions. The outdoor unit
The installation shall be done by specialist technicians.

2.4 Dimension Data

model
GUHD09NK3CO/GUHD12NK3CO
GUHD09NK3C1O/GUHD12NK3C1O
GUHD18NK3CO/GUHD18NK3C1O
GUHD24NK3CO/GUHD24NK3C1O
GUHD30NK3CO/GUHD30NK3C1O
GUHD36NK3CO/GUHD36NK3C1O
GUHD36NM3CO/GUHD36NM3C1O
GUHD42NK3CO/GUHD42NK3C1O
GUHD42NM3CO/GUHD42NM3C1O
GUHD48NK3CO/GUHD48NK3C1O
GUHD48NM3CO/GUHD48NM3C1O
GUHD60NM3CO/GUHD60NM3C1O

2.5 Installation Clearance Data

89
Item
A
776
848
955
980
1107
1085
Figure3-17
B C
320 540
320 540
396 700
427 790
440 1100
427 1365
Unit:mm
D E
510 286
540 286
560 360
610 395
631 400
620 395