GREE ELECTRIC GUHD09NK3CO Service Manual page 182

U-Match Series DC
Inverter Service Manual
4.2.3 Floor Ceiling Type
Model: GTH09K3CI/GTH12K3CI/GTH18K3CI/GTH24K3CI/GTH30K3CI/GTH36K3CI/GTH42K3CI
Remove panel grating module
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during disassembly. Do not put
Step
R e m o v e s u b -
a s s y o f f r o n t
grill
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during disassembly. Do not scratch
the outer parts.
Step
Re m ov e r i gh t
plates
Re mo v e r i g h t
plates
179
Illustration
Illustration
Handling Instruction
Move down the clip of
the sub-assy of fromt grill
until the front grill is open.
(As is shown in the graph,
a r r o w r e p r e s e n t s t h e
position of bottons. There
are two clips for each
grating.)
Handling Instruction
shown in the graph with
screwdriver and then push
upward to remove the
right and left finishing
plates.(As is shown in the
graph, arrow represents
the position of screws.)
shown in the graph with
screwdriver and then push
upward to remove the
right and left finishing
plates.(As is shown in the
graph, arrow represents
the position of screws.)