GREE ELECTRIC GUHD09NK3CO Service Manual page 160

U-Match Series DC
Inverter Service Manual
5. Loosen the backside
panel
6. Remove the rear side
plate.
7. Disconnect the power
cord of the motor
8 Remove the fan from
motor
9 . R e m o v e t h e f a n
blades
157
Loosen the screws on the
backside panel with a screw
driver.
Remove the rear side plate
away from the unit
Disconnect the motor power
cord on the main board with
hands or pliers
Remove the fan from motor.
Remove the fan blades away
from the motor.