GREE ELECTRIC GUHD09NK3CO Service Manual page 186

U-Match Series DC
Inverter Service Manual
Step
D i s a s s e m b l y o f
panel parts
Disassembly of sub-assy of electric box
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during disassembly, especially the
components inside the box in case of water and hit.
Step
1. Disassembly
of electric box
cover
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during disassembly, especially the
Step
Disassembly of
sub-assy of air
Disassemble of water-containing plate modules
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during disassembly.
Step
Disassemble of
water-containing
plate modules
183
Illustration
Illustration
Illustration
Illustration
Handling Instruction
the cover to remove the cover.
Handling Instruction
by the arrow in the graph on
left and remove the electric box
cover.
Handling Instruction
plates from the air deflecting
plate support assembly, and
then remove both ends from
the air sweeping motor. joint
(As is shown in the graph,
arrow represents the support
assembly and circle the air
sweeping motor joint.)
Handling Instruction
plate modules.