GREE ELECTRIC GUHD09NK3CO Service Manual page 187

Disassembly of evaporator components
be long, seal the copper tube .
Step
Disassembly
of evaporator
components
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during disassembly.
Step
D i s a s s e m b l y
of fixing plate
sub-assy for air
sweeping fans
Disassembly of fan and motor components
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during disassembly,
especially the fastening screws for fans.
Step
1. Disassembly of
front and back
scroll cases
2. Disassembly
of fans
Illustration
Illustration
Illustration
U-Match Series DC
Inverter Service Manual
Handling Instruction
evaporator, 3 screws of water
groove press board and the
2 screws of water board to
remove the evaporator.
Handling Instruction
m o u n t i n g s u p p o r t a n d
mounting plate of swing
motor in turn.
Handling Instruction
of front and back scroll cases
with hands and pull upward
to remove the front scroll
case. Then remove the screws
on the back scroll case. Lift
the buckle of back scroll case
with hands and remove it.(As
is shown in the graph, circle
represents 2 screws on left
and right.)
of coupling, take out the
rotating shaft and louver,
then loosen the tighten
screw of louver to remove
the louver.
184