GREE ELECTRIC GUHD09NK3CO Service Manual page 184

U-Match Series DC
Inverter Service Manual
Remove evaporator components
long, seal the copper tube.
Step
Remove evaporator
components
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during disassembly.
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during disassembly.
Step
R e m o v e f i x i n g
plate sub-assy for
air sweeping fans
Remove fan and motor components
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during disassembly, especially
the fastening screws for fans.
Step
1. Remove front and
back scroll cases
181
Illustration
Illustration
Illustration
Handling Instruction
b y t h e a r r o w i n t h e g r a p h
with screwdriver. (There are 6
screws on left and right of the
evaporator and 5 on evaporator
outlet press plate modules)
Handling Instruction
the graph with screwdriver.
Handling Instruction
joints of front and back
scroll cases with hands
and pull upward to remove
the front scroll case. Then
remove the screws on the
back scroll case. Lift the
buckle of back scroll case
with hands and remove
i t . ( A s i s s h o w n i n t h e
graph, circle represents 2
screws on left and right.)