Disassembly And Assembly Procedure Of Main Parts; Outdoor Unit - GREE ELECTRIC GUHD09NK3CO Service Manual

U-Match Series DC
Inverter Service Manual

4 DISASSEMBLY AND ASSEMBLY PROCEDURE OF MAIN PARTS

4.1 Outdoor Unit

Double-fan Inverter Outdoor Unit, applicable to 9 KBtu/h~12 KBtu/h
Disassembly and Assembly of external casing
Note: Before removing the outer housing, make sure that the unit has been cut off from the power supply.
Step
1 Disassemble the
top panel
2 Remove the top
panel
3. Disassemble the
grille
4.Remove the grille
5. Disassemble the
back panel
141
Illustration Handling Instruction
a. Cut off the power supply
b. Recover the refrigerant
c. Loosen the screws on
the top panel with a screw
driver.
Remove upwards the top
panel away from the unit.
Loosen the screws on the
grille with a screw driver.
Remove the grille away
from the unit .
Loosen the screws between
the front panel and the
partition board with a
screw driver.