GREE ELECTRIC GUHD09NK3CO Service Manual page 170

U-Match Series DC
Inverter Service Manual
5. Recharge the refrigerant
to the system through
liquid valve.
Removal and Installation of Fan and Motor
Note : Before the dismantlement of the motor, make sure the unit is powered off.
Step
1. Loosen the front
grille
2. Remove the front
grille
3. Remove the top cover
167
Illustration
through liquid valve.
the indications on nameplate.
Handling Instruction
Loosen the screws fixing the
front grille and the panel.
Remove the front grille from
the unit.
Loosen the screws fixing the
top cover.