GREE ELECTRIC GUHD09NK3CO Service Manual page 152

U-Match Series DC
Inverter Service Manual
Disassembly and Assembly of electrical parts box
Remark : Before removing the electric box or electric box sub-assembly, make sure that the power has been cut off.
Step
1 . R e m o v e t h e
backside panel
2. Disconnect the
power cord of the
motor
3 . L o o s e n t h e
s c r e w s b e t w e e n
the electric box
and side panel and
motor base.
4 . R e m o v e t h e
electric box sub-
assembly
5. Mount a new
electric box sub-
assembly
149
Illustration
Handling Instruction
Remove the backside panel away from
the unit
Disconnect the motor power cord on the
main board with hands or pliers.
Loosen the screws between the electric
box and side panel and motor base with a
screw driver.
upward from the middle isolation plate.
assembly to correct position
box sub-assembly to middle isolation
plate and rear side plate according to
disassembly procedures.