GREE ELECTRIC GUHD09NK3CO Service Manual page 165

5. Loosen the back
side plate
6 . R e m o v e t h e
backside plate
Removal and Installation of Gas-liquid Separator and Compressor
Remark: Before removing the compressor, make sure that there is no refrigerant inside the pipe system and that the power has been
cut off.
Step
1. Remove power
connecting wire of
compressor
Illustration
U-Match Series DC
Inverter Service Manual
Loosen the screws fixing the
back side plate.
Remove the back side plate.
Handling Instruction
A. Loosen the power box cover of the
compressor.
B. Pull out the power connecting wire of
the compressor.
C. Remove the power insert of the
compressor
162