GREE ELECTRIC GUHD09NK3CO Service Manual page 50

U-Match Series DC
Inverter Service Manual
4.2.2 Instruction to Function of Buttons
No.
1
2
6
3
4
5
7
8
4 Mode
and
and
4 Mode
and
5 Function
5 Function
And
7Timer
5 Function
and
47
Description
Enter/cancel
Fan
Mode
Function
Timer
On/off
Memory function
Lock
Enquiry and setting of
address of wired controller
Setting Ambient
Temperature Sensor and
three Grades of Speed for
Indoor Fan
Enquiry of Historical Errors
Function of Button.
Function selection and canceling;
Press it for 5s to enquiry the outdoor ambient temperature.
Running temperature setting of indoor unit, range :16-30
Timer setting, range:0.5-24hr;
Switchover between quiet/auto quiet.
Setting of high/middle/low/auto fan speed.
Setting of cooling/heating/fan/dry mode of indoor unit.
Switch over among these functions of air/sleep/turbo/save/e-heater/blow /quiet
Timer setting.
Turn on/off indoor unit.
function (If memory is set, indoor unit will resume original setting state after
power failure and then power recovery. If not, indoor unit is defaulted to be off
after power recovery. Memory function is defaulted to be set before outgoing.).
Under the off-state of the unit, press Mode/Function button for 5 seconds to set the
address.
Under off state of the unit, press Function and Timer buttons continuously for 5s to
state, press Enter/Cancel button to quit, or it will automatically quit after there is
not any operation of button in 30min.
;