GREE ELECTRIC GUHD09NK3CO Service Manual page 154

U-Match Series DC
Inverter Service Manual
3. Disassemble the
grille
4.Remove the grille
5. Disassemble the
back panel
6. Remove the back
panel.
7.Disassemble the
right side panel.
151
Loosen the screws on the grille
with a screw driver.
Remove the grille away from
the unit .
Loosen the screws between the
front panel and the partition
board with a screw driver.
Remove the back panel away
from the unit .
Loosen the screws on the side
panel with a screw drive.