Leds On The Keypad - Miele PG 8056 Operating Instructions Manual

LEDs on the keypad

Light-emitting diodes that indicate the status of the dishwasher are
integrated in the keypad.
Except for the Start/Stop button, which has a green LED during
normal operation, all other LEDs light up yellow.
In the event of a fault the Start/Stop button flashes red.
Button LED
 (On/Off)
ON
button
OFF
,  ON
and 
buttons
(program
shortcut
OFF
buttons)
 button
ON
(additional
programs)
OFF
Start/Stop ON
button
FLASHES
GREEN
FLASHES
RED
OFF
 button
ON
(door
button)
FLASHES
OFF
Status
The dishwasher is on.
The dishwasher is off.
The lit program has been selected. At
the end of the program, the LED will
remain lit until a different program is
selected.
The program is not selected, or program
settings are being configured.
A program was selected from the
program list. At the end of the program,
the LED will remain lit until a different
program is selected.
No program has been selected from the
list, or program settings are being
configured.
A program is running.
A program has been selected, but has
not yet started.
A fault has occurred.
A program has finished.
A program has been selected, but has
not yet started.
A program has finished and the door is
closed.
A program is running.
Operation
49