Miele PG 8056 Operating Instructions Manual page 75

Entering the
PIN code
Release
If in the menu you have selected
Additional settings
menu up for access via a PIN code, you have to
enter the PIN code.
Additional settings
Settings within the
by people with administrative rights.
The PIN code is set at the factory to 8 0 0 0 if access in
settings
is blocked.
The following PIN-entry screen will appear in the display, for example:
Enter code
0 0 0 0
Use the  and  arrow buttons to enter the numerical values, and

confirm each entry with the OK button.
Each press of the OK button takes the highlighting to the next input
position automatically.
Each entered digit is replaced by an asterisk (*).
The protected settings are unlocked once all digits have been
correctly entered.
If an incorrect PIN code is entered, the following message will appear
in the display:
Wrong code entered
Press the OK button to acknowledge the message.

The display will then revert to the input menu.
Additional settings
Block
or if you have set the
menu can then only be changed
K
OK
Additional
75