Canceling A Program - Miele PG 8056 Operating Instructions Manual

Canceling a program

 Risk of damage due to water leakage.
The door of the Commercial Dishwasher must not be opened
during operation.
Once the program has started, leave the door closed to ensure that
no water drips out.
Only cancel a program which has already started if strictly necessary,
e.g., if you want to change the program.
In the event of a fault, the program will be canceled automatically.
If you cancel a program which has already started or a program is
canceled due to a fault, select the
before opening the door.
 Caution! The wash items and the interior walls of the
Commercial Dishwasher may be hot.
Risk of injury by scalding or burning!
Press the Start/Stop button.

The following will appear in the display:
Cancel program
Yes
No
(
Yes
Select and confirm your choice with the OK button.

The program will only be canceled when
If there is no further input approx. 20 seconds after the Start/
Stop button has been pressed, the display will revert to the
program cycle.
The following message will appear in the display:
Program cancelled
If you change the program and the detergent dispenser flap has
already opened, add more detergent as needed.
Drain
program straight away
Yes is confirmed.
K
Operation
55