Locking Control Levers - Zetor PROXIMA GP Series Operator's Manual

ELECTRO-HYDRAULIC SYSTEM

Locking control levers

Outer hydraulic circuit control levers are locked in neutral
(N) position.
To unlock them, raise the lock control (1) and turn it to
a stop point in the direction shown by the arrow.
To lock them again, move the levers to neutral (N) position
and turn the lock control in the opposite direction than
shown by the arrow to a stop point and push the control
down. This locks the lever in neutral position.
For safety reasons, always lock outer hydraulic
circuit levers in neutral position (N).
PGPPN083
140