Item
Component
6
Base body
7
Axial washers
9
Countersunk head screws
10
Ball
11
Spring guide housing
12
Compression spring
Not included in scope of delivery
Item
Component
not illus
Lamination bar
trated
or side bar
Foot stirrup
or foot stirrup
Lamination dummy set
see fig. 2
Lamination dummy – lower part (item
1)
Shoulder screw (item 3)
The cover for the lamination dummy
(item 2) is not included in the set.
3 Intended use
3.1 Indications for use
System ankle joints are intended to be used exclusively for providing a
patient with a lower limb orthosis.
In case of unilateral use, the manufacturer recommends that the system
ankle joint be processed by means of the lamination resin technique or car
bon prepreg technology.
3.2 Indications
Partial or total paralysis of the leg muscles.
Indications must be determined by the physician.
14
Reference number
17LA32N=16 (size 16)
17LA32N=20 (size 20)
Axial washers set
17LA33N=10 (size 10)
17LA33N=12 (size 12)
17LA33N=14 (size 14)
17LA33N=16 (size 16)
17LA33N=20 (size 20)
501S137=M4x8 (size 10, 12)
501S137=M4x10-2 (size 14)
501S137=M5x10-1 (size 16, 20)
Compression spring set
17LA34N=12 (size 10, 12)
17LA34N=14 (size 14)
17LA34N=16 (size 16)
17LA34N=20 (size 20)
Reference number
17LS3=*
17LV3=*
17LF3N=*
17LF31N=*
17LD1N=*