Standard Control Unit; Standard 230V Control Unit; Description Of The Display And Control Elements - Kessel Aqualift F Mono Instructions For Installation, Operation And Maintenance

Lifting station for wastewater with and without sewage, for free-standing set-up in frost-protected rooms
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 39
8.

Standard control unit

8.1.

Standard 230V control unit

Control unit housing
4x PT-screw max. (1 Nm)
Mains cable
Brief operating instructions
Green LED „POWER"
Red LED „Alarm"
Orange LED „Level"
Orange LED „Pump"
„Alarm" key
„Pump" key
Connection for pump motor
Connection for level pressure switch
Connection for potential-free switch contact
8.1.1

Description of the display and control elements

Display elements
Normal mode
(for information
for the operator)
Problems
Control elements
Key
STANDARD CONTROL UNIT
„Power"
green
„Alarm"
red
„Level"
orange
„Pump"
orange
see section 8.2, indication of warnings and faults
„Alarm"
Switches off the acoustic alarm
Acknowledges warnings and faults
For the selection and change of settings
„Pump"
Manual operation pump
For the selection and storage of new settings
60/228
Voltage supply OK
Alarm level exceeded
On-level exceeded
Pump output activated
[21]
[21]
V 1.0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aqualift f duo

Table of Contents