Clean The Wastewater Tank And Level Sensor; Carry Out A Functional Check; Troubleshooting - Kessel Aqualift F Mono Instructions For Installation, Operation And Maintenance
Lifting station for wastewater with and without sewage, for free-standing set-up in frost-protected rooms
Hide thumbs
Also See for Aqualift F Mono:
- Installation manual (264 pages) ,
- Instructions for installation, operation and maintenance (168 pages) ,
- Manual for installation, operation and maintenance (160 pages)
Table of Contents
Advertisement
Available languages
Available languages
7.3.6
Clean the wastewater tank and level sensor
Clean the submersible pipe and make sure there is no foreign matter in it. Clean any other level sensors fitted.
Fit the inspection cover and submersible pipe again. Maximum tightening torque 3 Nm
7.3.7
Carry out a functional check
See description in the control unit's operating and maintenance instructions.
7.4.
Troubleshooting
Troubleshooting is described in the control unit's operating and maintenance instructions.
V 1.0
MAINTENANCE
59/228
Advertisement
Chapters
Table of Contents
