Attaching The Type Plate; Attaching The Hook Bolt And Chain; Installing The Control Unit - Kessel Aqualift S XL Instructions For Installation, Operation And Maintenance

4.4

Attaching the type plate

• Affix type plate to inside of upper section where easily
accessible. Content of type plate should be discernible
from outside.
4.5

Attaching the hook bolt and chain

• Drill hole (Ø 4 mm) into the middle of the upper section.
Screw in clip bolt <1>.
• Hook chain into clip bolt and insert cable for level sensor <2>.
4.6

Installing the control unit

• Install the control unit as described in the instructions enclosed with it.
• Safely lay all cables of the electrical components.
2018/07
Installation
51 / 208
Pumpstation Aqualift F/S XL
xxxxx
xxxV xxHz x,xA x,xkW
xxm³/h xxm
S3 xx% ED IP xx (xmWS/xh)
Ser. Nr. xxxxxxxxx
RevStd.: x.x MM/JJ DIN-EN 1
Pumpstation
Aqualift F/S XL
xxxxx
www.kessel.de/info
xxxxxxxxxx
Ill. [14]
1
Ill. [15]
2
010-992