How To Find The Range And Bearing Between Two Locations - Furuno NAVnet TZtouch2 Operator's Manual

2. PLOTTER
2.7 How to Find the Range and Bearing Between
Two Locations
The [Distance] item in the slide-out menu measures the range and bearing between
any two locations on your chart. Range and bearing between the two locations are dig-
itally indicated on the screen.
1. Open the slide-out menu.
2. Tap [Distance].
A dashed line runs between the start location and the 2nd location. The range,
bearing, SOG, and TTG to the 2nd location is shown at the top of the screen.
Range
Starting location Starting location
3. To change the location of either point, drag and drop.
4. To quit the distance measurement, tap [Cancel Ruler] at the top right-hand corner
of the screen.
2-8
Bearing
Icon Icon
Drag to change location. Drag to change location.
Speed Over the Ground
2nd location 2nd location
TTG