Dual Monitor Configurations - Furuno NAVnet TZtouch2 Operator's Manual

1. SYSTEM INTRODUCTION
5. Click [Get started!] to finish.
Your name
Your e-mail address
6. From a PC or mobile device, follow the link provided in the e-mail to log into your
account. Leave the NavNet TZtouch2 as is.
7. Tap [Go to Log in page] on this equipment.
8. Enter the e-mail address used to register the account, and your password.
9. Tap [Log in].
The name used to create the account appears in the [Logged As] field. The Status bar
shows (in yellow) "You are logged as (your name)" and several beeps sound.
1.21

Dual Monitor Configurations

The TZT2BB supports dual monitor display, provided that the monitors are connected
to the HDM1 OUT and HDMI2 OUT ports on the MPU-004. Monitors connected in this
manner can be operated individually of each other.
1-41