How To Change The Polar Wind File; Routes Menu - Furuno NAVnet TZtouch2 Operator's Manual

5. ROUTES
5.14.3

How to change the polar wind file

Your NavNet TZTouch2 comes with a pre-installed polar wind file. This file contains
data for sailboats, helping to improve sailing performance, by applying the data to the
laylines. Polar files can be downloaded from the MyTimeZero
ported to the NavNet TZTouch2.
1. From a your PC (internet connection required), access the following site (without
quotation marks) "https://furuno.mytimezero.com/#/tzt2/polars".
2. Login to your MyTimeZero
3. Download the required polar file and save the file to a USB flash memory.
Note: SD cards and microSD cards cannot be used.
4. Connect the USB flash memory to the TZTouch2 USB cable.
5. On the TZTouch2, open the home screen, then tap [Settings][Files]. The Files
menu appears.
6. Tap [Import Wind Polar]. The list of available polar wind files appears.
7. Tap the file you want to import, then tap [OK].
8. Check that the select file's name appears in the menu, directly below [Import Wind
Polar].
9. Tap the close button to finish.
5.15

Routes Menu

This section provides descriptions for the items in the [Routes] menu not previously
mentioned.
[Default Route Color]: Select the color of the routes. The options are red, blue,
green, yellow, magenta, orange, cyan, or black & white.
[Route Thickness]: Select the thickness of the routes.
5-18
™
account.
™
cloud service and im-