Packing For Return - ABB Gas Sampling Probe 2 Operator's Manual

22

Packing for Return

Packing Probe 2
1 If the original packing material is no longer available, wrap the device in
bubble foil or corrugated cardboard. When shipping overseas, also heat-seal
the device air-tight in 0.2 mm thick polyethylene, including a desiccant (e.g.
silica gel). The amount of desiccant used should be adequate for the package
volume and the probable shipping time (at least 3 months).
2
Pack the device in an adequately large box lined with shock absorbent
material (e.g. foam material). The thickness of the cushioning material
should be adequate for the weight of the device and the mode of shipping.
The box should also be lined with a double layer of bitumen paper for
overseas shipping.
3 Mark the box "Fragile! Handle with care!".