Inspection And Maintenance; Maintainance Of The Filter Element Of Probe 2 - ABB Gas Sampling Probe 2 Operator's Manual

C 4
H A P T E R

Inspection and Maintenance

Maintainance of the Filter Element
of Probe 2
Interval for Cleaning the Filter Element
WARNING
Danger of burns!
The gas sampling probe becomes hot during operation. Touching this
component can cause burns.
WARNING
Health hazard!
Dependent on the substances which it comes into contact with during
operation, the filter element could be contaminated with toxic or corrosive
substances. Always wear suitable protective clothing for cleaning work.
The service life of the filter depends on the operating conditions. Remove it as
required, so that you can visibly eliminate the dirt accumulation mechanically or
exchange it.
If the filter stone is obviously damaged, replace it with a new one. The interval
also depends on the operating conditions. You can determine this during
operation.
19