Choosing The Sampling Point - ABB Gas Sampling Probe 2 Operator's Manual

Table of Contents

Choosing the Sampling Point

Select a sampling point as per the planning documents which is suitable for

extracting a representative sample flow.

Install the wall tube with assembly flange (DN 65, PN 6, Form B to DIN

2573) at the sampling point in such a way that the probe tube can be easily

installed and removed (see the section "Information on the Installation of the

Wall Tube" on page 11).

The probe tube must be easily accessible to allow maintenance work to be

performed.

Table of Contents

Do you have a question about the Gas Sampling Probe 2 and is the answer not in the manual?