Putting Out Of Service And Packing; Putting Out Of Service - ABB Gas Sampling Probe 2 Operator's Manual

C 6
H A P T E R

Putting out of Service and Packing

Putting out of Service

WARNING
Danger of burns!
The work described in this chapter requires specialist knowledge. As a result,
it may only be carried out by persons who are qualified and specially trained.
The metal parts may have high temperatures as a result of operation.
WARNING
Electric shock!
You must disconnect the voltage for the current circuit, in which the heating
rod of probe 2 is integrated, before putting the device out of service.
Otherwise, there is the danger of electric shock.
Step Action
1 Disconnect the power supply to the sample gas pump.
2 Disconnect the power supply to probe 2.
3 Clean the filter.
21