Customizing The Setups Via The Microphone Effect Parameters - Yamaha QY100 Owner's Manual

Customizing the Setups via the Microphone Effect Parameters

The QY100 microphone amp simulator section is has three main
effect blocks: the Delay block, the Chorus block, and the Reverb block, as
shown in the diagram.
GUITAR/MIC
INPUT
All of the available parameters for each setup are located below the
setup number and name in the GTR/MIC EDIT display. The delay parame-
ters are located near the top of the parameter list, and are indicated by an
inverse "D" before the parameter name. The chorus block parameters are
next, and are indicated by an inverse "C" before the parameter name. The
reverb block has only one parameter, indicated by — you guessed it — an
inverse "R". The parameter list also includes a "Volume" parameter and an
"On/Off" parameter which are described below.
Parameter page 1
Volume parameter
Delay block
parameters
48
For Singers: Cool Vocal Processing
GAIN
Delay
block
Parameter name
Chorus Reverb
block block
Parameter value
Graphic parameter
value indicator
LINE OUT/
PHONES