Yamaha QY100 Owner's Manual page 78

b Record the First Track
and count-in work the same way as they do for pattern and chord
recording: the metronome will sound and you'll be given a one-
measure count-in before recording actually begins (the number of
count-in measures can be changed via the Utility mode — page
245). The count-in is also indicated by negative numbers in the
measure-number area of the display. With the default count-in
setting of one measure, "-01" will appear during the count-in,
then recording will begin from measure "001".
Once recording begins, play the part on the QY100 micro-key-
board or on an external MIDI keyboard or other controller.
78
Add Some Details to Complete the Accompaniment
Press the [>] button to begin recording. The metronome
NOTE
• If you have trouble playing a part in real time (or you'd simply rather
enter the notes with scientific precision), use the step recording mode
described on page 91 to enter the notes one at a time, with complete
control over note timing and duration.
• If you make a mistake (or two, or three ...) while recording, you can
always go back and record the entire track again. But if only a few minor
adjustments are needed, you might prefer to use the QY100 EDIT mode
(page 216) to edit the track as required.
Count-in