Customizing The Setups Via The Amp Simulator Parameters - Yamaha QY100 Owner's Manual

For Guitarists: Outstanding Amp Simulation & Effects

Customizing the Setups via the Amp Simulator Parameters

Although the QY100 guitar amp simulator setups sound good as they
are, you'll undoubtedly want to "tweak" them a bit to create your own
sound. Here's how:
The QY100 guitar amp simulator section is made up of three main
blocks: the Preamp block, the Chorus block, and the Reverb block, as
shown in the diagram.
GUITAR/MIC
INPUT
All of the available parameters for each setup are located below the
setup number and name in the GTR/MIC EDIT display. The preamp parame-
ters are located near the top of the parameter list, and are indicated by an
inverse "A" before the parameter name. The chorus block parameters are
next, and are indicated by an inverse "C" before the parameter name. The
reverb block has only one parameter, indicated by — you guessed it — an
inverse "R". The parameter list also includes a "Volume" parameter and an
"On/Off" parameter which are described below.
Parameter page 1
Volume parameter
Preamp block
parameters
GAIN
Preamp
block
Parameter name
Chorus Reverb
block block
Parameter value
Graphic parameter
value indicator
LINE OUT/
PHONES
39