Create Continuous - Yamaha QY100 Owner's Manual

This job makes it possible to create continuous data of the specified
type in order to produce smooth pitch bends, aftertouch, etc.
Data type
parameter
The "TR" parameter selects the track to be affected by the Create
Continuous job: D1, D2, PC, BA, C1, C2, C3, C4.
The "M" parameters above the graphic bar are used to specify the
first measure:beat and last measure:beat of the range to be modified.
The data type parameter determines the type of data to be created.
PB
CC
CAT
EXC
The "Data" parameters set the range of data values to be created:
the left number sets the starting value and the right number sets the end-
ing value. The range of values available will depend on the type of event
selected.
The "Clock" parameter sets the spacing between the created
events in clocks: "000" ... "999".
The Pattern Jobs

12 : Create Continuous

Pitch bend events.
Control change events. When this event type is selected a control
change number parameter appears to the right of the type parame-
ter. The control change parameter determines the MIDI control
change number to be created: "000" ... "127".
Channel aftertouch events.
Master volume.
First measure Last measure
First beat Last beat
203