Mix Track - Yamaha QY100 Owner's Manual

Combines the data contained in two specified tracks and places the
result in a third track (which can be the same as the second track).
The upper and center "TR" parameters select the first and second
source tracks — i.e. the tracks which are to be mixed: "01" ... "16".
The lower "TR" ("01" ... "16") parameter specifies the destination
track to which the mixed data is to be copied.
After setting the parameters as required press [ENTER] to execute
the Mix Track job. The metronome icon will appear on the display while the
data is being processed, then "Completed !" will appear briefly when the
job is done. Press the [EXIT] button to return to the job list, or a mode but-
ton to go directly to the selected mode.
NOTE
• If there is no data in the second source track, the data from the first source track is
simply copied to the destination track.
174
The Song Jobs

18 : Mix Track