Accessing & Editing The Effect Parameters - Yamaha VL70-m Owner's Manual

88
Effects & Effect Editing
Accessing & Editing the Effect Parameters
The EFFECT sub-modes — REV, CHO, VAR, and DIST — and the param-
eters they contain can be accessed from the PLAY mode as follows:
1. Press [EFFECT]
Press the [EFFECT] button to go to the EFFECT sub-mode menu.
2. Select the Desired Sub-mode
Use the SELECT [<] and [>] buttons to select the REV (reverb), CHO
(chorus), VAR (variation), or DIST (distortion) sub-mode. The icon to the
left of the name of the selected sub-mode will flash when the corresponding
sub-mode is selected.
3. Press [ENTER]
Press the [ENTER] button to go to the selected sub-mode. "REVERB
EDIT", "CHORUS EDIT", "VARIATION EDIT", or "DISTORTAION
EDIT" will appear at the top of the display, depending on the selected sub-
mode.
4. Select a Parameter
Use the SELECT [<] and [>] buttons to select the parameter you want to
edit (see the parameter descriptions, below). The name of the currently
selected parameter and its current setting appear on the second line of the
display. An arrow to the left and/or right of the parameter name/value
indicates that the SELECT [<] and/or [>] buttons can be used to select
more parameters in the indicated direction.
5. Edit the Selected Parameter
Use the VALUE [-] and [+] buttons to set the value of the selected parameter
as required.