Yamaha QY100 Owner's Manual page 62

z Select the SONG mode & an Empty Song
necessary, make sure the cursor is located at the song number at
the top of the display and use the [+1] and [-1] buttons to select
an "empty" song.
x Select the "Pt" Track to Record the Pattern Changes
the cursor sideways to select the "Pt" (Pattern) track. Once the
"Pt" track has been selected, move the cursor vertically to acess
other areas of the screen (moving it sideways will select a differ-
ent track). The selected track will remain highlighted even after
moving the cursor to other areas of the screen.
"Pt" track
62
Record Your Own Chord Progression & Pattern Changes
Press the [SONG] button to select the SONG mode then, if
The SHIFT-Number Data Entry Method:
You can also use the SHIFT-Number method to enter song
numbers or other data values. Use the numbered black
keys on the micro-keyboard to enter the required number
while holding the [SHIFT] button, then press the [ENTER]
button.
NOTE
• If for some reason all 20 songs contain data, use the "Clear Song" job
described on page 179 to clear a song for recording.
Move the cursor to the track area of the display, then move