Copy Track - Yamaha QY100 Owner's Manual

Copies all data from the specified track to any other specified track.
The upper "TR" parameter selects the source track — i.e. the track
from which the data is to be copied: "01" ... "16".
The lower "TR" parameter selects the destination track — i.e. the
track to which the data is to be copied: "01" ... "16".
The "Event", "Play Effect", and "Voice" check boxes make it pos-
sible to specify whether or not the corresponding types of data will be cop-
ied or not (the data is copied when the checkbox is checked).
After setting the parameters as required press [ENTER] to execute
the Copy Track job. The metronome icon will appear on the display while
the data is being processed, then "Completed !" will appear briefly when
the job is done. Press the [EXIT] button to return to the job list, or a mode
button to go directly to the selected mode.
NOTE
• If the destination track already contains data, the copied track data will erase and
replace the previous data.
The Song Jobs

17 : Copy Track

173