Tempo Changes, Too; If You Make Mistakes - Yamaha QY100 Owner's Manual

Tempo changes can be recorded to the QY100 "Tm" (Tempo) track
in much the same way that pattern changes are recorded to the pattern
track and chord changes to the chord track.
After recording your pattern and chord tracks select the "Tm" tempo
track, press the [ ] button to engage the record ready mode (only realtime
replace recording can be selected for the tempo track), press [>] to start
recording (the cursor will automatically move to the tempo parameter), then
use the [+1] and [-1] buttons or the SHIFT-Number entry method (page 34)
to specify the required tempo changes at the appropriate times during
recording. Press [ ] to stop recording. Tempo changes can be edited in
detail as described on page 216.
Tempo
"Tm" track
Don't worry. A few mistakes made in the realtime record can usually
be corrected quite easily in the STEP record mode described on page 81
70
Record Your Own Chord Progression & Pattern Changes

Tempo Changes, too ...

NOTE
• If you do record tempo changes to your accompaniment, be sure to
record the starting tempo at the beginning of the sequence as well.

If You Make Mistakes ...