Yamaha QY100 Owner's Manual page 134

Yamaha music sequencer qy100 owner's manual
Hide thumbs Also See for QY100:
Table of Contents

Advertisement

pan pots can be used to position the sound of the corresponding
track anywhere from left to right in the stereo sound field. Posi-
tion the cursor at the pan pot, then use the [-1/NO] and [+1/YES]
buttons to set the pan position. The graphic pan pot will rotate to
the corresponding position. The pan positions also have numeric
values (1 through 63) that appear at the top of the display: "Cen-
ter" is center, "Left 63" is full left, and "Right 63" is full right.
There's also a "Random" setting in which the pan position is set
randomly.
produce the best "mix" (balance) between the various voices.
Position the cursor at a fader, then use the [-1/NO] and [+1/YES]
buttons or the SHIFT-Number entry method (page 34) to set the
fader level. The graphic fader will move to the corresponding posi-
tion (higher for higher volume, and lower for lower volume). The
fader positions also have numeric values (000 through 127) that
appear in the upper right corner of the display: "000" is minimum
volume (no sound) and "127" is maximum volume. The default
setting is "100" for all tracks. The leftmost "mst" fader is a
"master" fader which can be used to adjust the overall volume
level, while the "pat" fader independently controls the level of
the pattern track.
134
NOTE
In any QY100 mode, the micro keyboard or an external MIDI keyboard
plays the voice assigned to the currently selected track. A MIDI key-
board will also play the voice assigned to a track with the same number
as the external keyboard's MIDI transmit channel unless the "ECHO
BACK" parameter (page 248) is set to "Rec Monitor".
If you're playing the micro keyboard, use the octave keys to access the
full range of instruments in each drum or effects kit.
See the Data List for a complete list of note assignments (i.e. which
drum instruments and SFX sounds are assigned to which notes) for all
drum and SFX kits.
The Pan Pots
Like the pan pots on a mixing console, the VOICE mode
The Volume Faders
Each track has a graphic volume "fader" that can be set to
The Song Voice Mode

Advertisement

Table of Contents
loading

Table of Contents