Yamaha QY100 Owner's Manual page 64

b Select the Starting Pattern, Chord, and Tempo
tempo parameters and set as required (these will be the starting
values for your accompaniment).
n Record the Pattern Changes
changes to the QY100's pattern track. The metronome will sound
and you'll be given a one-measure count-in before recording actu-
ally begins (the number of count-in measures can be changed via
the Utility mode — page 245). The count-in is also indicated by
negative numbers in the measure-number area of the display.
With the default count-in setting of one measure, "-01" will
appear during the count-in, then recording will begin from mea-
sure "001".
64
Record Your Own Chord Progression & Pattern Changes
Move the cursor to the style number, section, chord, and
NOTE
• Just for the purpose of recording, you can set the tempo parameter at a
slower value than the actual playback tempo you will use, so you have
plenty of time to enter pattern and chord changes.
Press the [>] button to begin recording the pattern
Entering Pattern Changes
The cursor will automatically move to the style number
when you start recording on the pattern track. You can
record style number changes by using the [+1] and [-1] but-
Count-in