Extract Event - Yamaha QY100 Owner's Manual

Allows a specified type of event — note, program change, pitch
bend, control change, channel aftertouch, polyphonic aftertouch, or system
exclusive — to be extracted (removed) from a specified range of measures
in a specified track. The extracted data can be moved to the same range of
measures in any other specified track.
Event type
parameter
The upper "TR" parameter selects the source track — i.e. the track
from which the event data is to be extracted: "01" ... "16".
The lower "TR" parameter selects the destination track — i.e. the
track to which the extracted event data is to be moved: "01" ... "17", or
"Off" if you simply want to discard the specified event data.
The "M" parameters above the graphic bar are used to specify the
first measure:beat and last measure:beat of the range from which the
event data is to be extracted.
The event type parameter near the upper graphic bar determines the
type of event data to be extracted:
NOTE
PC
PB
CC
CAT
PAT
EXC
The Song Jobs

11 : Extract Event

Note events.
Program change events.
Pitch bend events.
Control change events. When this event type is selected a con-
trol change number parameter appears to the right of the even
type. The control change parameter determines the MIDI control
change number(s) to be extracted: "000" ... "127" or "All".
Channel aftertouch events.
Polyphonic aftertouch events.
Exclusive events.
First measure
Last measure
First beat
Last beat
165