Yamaha QY100 Owner's Manual page 245

REC COUNT
Settings: OFF, 1 Meas ... 8 Meas
This parameter sets the number of count-in measure provided before
realtime recording begins in the SONG and PATTERN modes. The
default setting is "1".
MASTER TUNE
Settings: -102.4 ... +000.0 ... +102.3
Tunes the overall pitch of the QY100 sound. The Master Tune range
is from "-102.4" through "+000" to "+102.3". Each increment cor-
responds to aproximately 1 cent (a cent is 1/100th of a semitone). A
setting of "+000" produces normal pitch: A4 = 440 Hz.
EXCLUSIVE INTERVAL
Settings: 0*100 ... 9*100
This parameter sets the delay time between exclusive data blocks
between 0 and 900 milliseconds in 100-millisecond increments. This
type of delay is sometimes necessary to allow smooth playback of
song data which includes large system exclusive messages.
FOOT SWITCH
Settings: Start, Section, AmpSim
Specifies the function of an optional footswitch (Yamaha FC-4 or FC-
5) connected to the rear-panel FOOT SW jack.
Start When "Start" is selected the footswitch starts and stops song
or pattern playback.
During SONG playback, the footswitch stops (pauses) playback
at the point at which it is pressed. The when it is pressed again
playback resumes from the point at which it was stopped.
During PATTERN playback, pressing the footswitch stops play-
back and locates to the top of the pattern. The next time the
footswitch is pressed playback will begin from the top of the
pattern.
Utility Functions
245