Honeywell HomMed Genesis Touch Quick Start Manual page 14

Genesis Touch Quick Start
Set the 1. If the Set time option is grayed out, select the check box next to the Automatic option.
time The Set date option should become available.
2. Select Set time. A screen similar to the following appears:
3. Use the + and - keys to scroll to the hours and minutes of the time that you want to
set the monitor to.
4. When the time you want to set the monitor to appears, select Set. A screen similar to
the following appears and the date you set appears under the Set date option:
5. When you have finished with your date and time settings, select the
to the following appears:
6. Select the key. The
back
10 P4810EN.01
screen appears.
Settings
©
2012 Honeywell HomMed. All rights reserved.
key. A screen similar
back
1/19/12