Configuring For A Thermometer - Honeywell HomMed Genesis Touch Quick Start Manual
Hide thumbs
Also See for HomMed Genesis Touch:
- Patient instructions for use (27 pages) ,
- User manual (82 pages)
Table of Contents
Advertisement
Genesis Touch Quick Start
Configuring For a Thermometer
If your patient will be manually reporting a temperature, you must configure it for use. The thermometer
reading is done through manual entry only, so no pairing is involved.
To configure the thermometer for use:
1. From the General Settings screen, select Peripherals. The Peripherals screen appears:
2. Select Thermometer. A check mark appears next to Thermometer:
©
34
P4810EN.01
2012 Honeywell HomMed. All rights reserved.
1/19/12
Advertisement
Table of Contents
