Genesis Touch Quick Start
8. Press the back icon. The Peripherals screen appears with the serial number of the scale that has been
paired listed:
Pairing an A&D Scale
The A&D scale is used in the U.K. only.
Before you can use an A&D Bluetooth scale:
•
Insert four AA batteries.
•
Set the switch on the bottom of the scale to WEIGHT B (second from left for kg). Refer to the
manufacturer's document that came with your scale for more information.
•
Configure the Genesis Touch monitor to use the A&D scale. Refer to Configuring the Scale Type for
more information.
•
Pair it with the monitor.
To pair an A&D scale:
1. From the General Settings screen, select Peripherals. The Peripherals screen appears:
24
P4810EN.01
©
2012 Honeywell HomMed. All rights reserved.
1/19/12